Das Entdecken genießen…

Die kleinste Halo Endstufe ist für kleines Geld bereits ein ganz großer Performer.

Sie verhilft mit ihrer Transparenz, Natürlichkeit und Dynamik dem Musikgeschehen

zu einer wunderbar komplexen und tief gestaffeltem Abbildung. Bestens geeignet um damit auf Forschungsreisen in die Musikwelt zu gehen und immer wieder Neues zu entdecken! Super Arbeitsgerät für Musikvielhörer.

Test bei „LowBeats“  Fazit: „Klang und Ausstattung perfekt!“

ON-OFF  (Spain) September, 2019
„One strength is its capability to reproduce a wide sonic palette, with depth and plenty of micro information. Parasound’s power amp is able to bring out the best bass from speakers. Different kinds of music made us appreciate the unusual character of this amplification. Outstanding!“

Getestet mit dem Parasound P6 Vorverstärker und Harbeth M30.1 Lautsprechern.

Halo brochure

A 23+ Technische Daten

Power Output – Stereo Mode (0.06% THD)
160 watts x 2, 8 Ω both channels driven
240 watts x 2, 4 Ω both channels driven

Power Output – Stereo Mode (0.9% THD)
210 watts x 2, 8 Ω both channels driven
300 watts x 2, 4 Ω both channels driven

Power Output – Bridged Mode (0.06% THD)
500 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended

Power Output – Bridged Mode (0.9% THD)
600 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended

*All Power measurement are at 120 VAC,
RMS continuous power, full audio band (20 Hz – 20 kHz)

Current Capacity
45 amps peak, per channel

Slew Rate
> 130 volts per microsecond

Frequency Response
5 Hz – 100 kHz, +0/-3 dB
20 Hz – 20 kHz, +0/-0.25 dB

Total Harmonic Distortion (THD)
< 0.06 % at full power
< 0.03 % at typical listening levels

IM Distortion
< 0.04 % TIM Unmeasurable Inter-channel Crosstalk > 85 dB at 1 kHz
> 70 dB at 20 kHz

Input Impedance
Unbalanced: 33 kΩ
Balanced: 66 kΩ,(33 kΩ per leg)

Total Gain
29 dB

Input Sensitivity for 28.28 V Out (8 Ω Load)
Unbalanced: 1 V
Balanced: 1 V per leg

S/N Ratio
> 112 dB, input shorted, IHF A-weighted
> 107 dB, input shorted, unweighted

Damping Factor
> 800 at 20 Hz

DC Trigger Requirements
+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements
2 mV – 10 mV

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions
Width: 17-1/4″ (437 mm)
Depth: 15″-1/4″ (388 mm)
Depth, with cables 17″ (432 mm)
Height, with feet: 4-1/8″ (105 mm)
Height, without feet: 3-1/2″ (89 mm), 2U

Net Weight
27 lb. (12.2 kg)

Shipping Weight
34 lb. (14.4 kg)

Power Requirement
Standby: <1 Watt
Idle (no music playing): 75 Watts
Typical Listening levels: 125 Watts
Maximum: 800 Watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear panel

Soundstage Network  July 2019
Reviewer’s Choice

„Parasound provides great value in the Halo A 23+. I haven’t heard better sound or seen higher build quality at this price. An impressive power amplifier.“

Stereo+ (Norway) January 2019
„Together, the Parasound P 6 and A 23+ are dynamite. Pure sonic magic with brilliant dynamics, delicious midrange and impressive resolution. To get such good sound for the price of this duo seems almost unnatural.